Sanitary Stainless Steel Pneumatic Butterfly Valve Actuator with Tri-Clamp Ends



Whether you are using your valve for flow control or to automate the on/off process of your valve? Our Pneumatic Actuator Butterfly Valve is top of the line.

Air pressure actuation will open and close the valve that is extensively used in process piping systems for isolation and control.
  • Material: 304 Sanitary Stainless Steel
  • FDA Certificated EPDM seal by AVK Belgium.
  • Internal Seal Material: EPDM
  • Sanitary Finish : Ra0.4 – 0.8um
  • Working Pressure: 4bar — 8bar (58 PSI — 116 PSI)
  • Working Temperature: 14 — 248°F (-10 — 120°C)
  • Pneumatic Actuator Torque: 40 Nm
  • 1/8″ Air Inlet
  • Run Mode: Normally Closed (NC) – Air to open and spring to close.
  • Run Mode: Normally Open (NO) – Air to close and spring to open.
  • Visual Indicator shows the current valve position.


AVK Belgium EPDM Seal Inside
The high-quality rubber is resistant to all types of chemicals used in water supply systems. AVK products are tested under national and international standards.  The production processes undergo regular testing, and all primary rubber components are marked and identifiable, enabling their full traceability. The main objective is to protect all consumer products from contamination and to ensure that all product surfaces can be mechanically cleaned, sterilized or easily dismantled for manual cleaning. This standard ensures optimum conditions for the food and dairy products that may come into contact with the specific component. AVK has developed an EPDM rubber compound that minimizes the buildup of bio-film. This prevents the bio-film from acting as a breeding ground for bacteria.  Certified by The Danish Ministry of Health and 3-A SSI as manufacturers of rubber compounds for food and dairy applications.

SKU: PneuAct-ButterflyValve Category: