Weed Wax Machine

Cedarstone Industry offers the highest-quality weed wax machine for businesses in the cannabis industry. As marijuana becomes less and less criminalized, Cedarstone saw the opportunity to help those looking for the right equipment for the extraction of these popular chemicals. Since 1992, Cederstone Industry has dedicated its work to providing premium machines.

What makes our business different than others is that we work closely with our clients in order to ensure customer satisfaction. Our teams manufacture a variety of machines that clients use in the commercial food and beverage industry. Of course, manufacturing is just a fraction of what we do. Cedarstone Industry also services currently installed machines and install them ourselves.

Blue Bell Ice Cream

Blue Bell is just one client on our long list of satisfied customers.

So, clients get the full-service all in one place. From CBD extraction to food processing, our machines can help your company. Cedarstone Industry truly cares about the customers and clients will certainly see that. Cedarstone Industry has more than 50 happy clients in the brewing, commercial food, and the cannabis industry.

To top it all off, Cedarstone Industry is an ASME certified manufacturer. The standards set by the ASME certification means we follow public safety and quality regulations. This certification is important because it allows clients to put their trust in us. Each client has a different experience from the last because we customize it to their industry. There is no copying and pasting when it comes to Cedarstone Industry.

What is weed or cannabis wax?

Cannabis wax is a concentrate of oils that originate from marijuana plants. The wax may appear golden and soft or it can appear firmer and crumbly in some cases. The wax can potentially be potent because it is essentially all of the oils in the plant. In some cases, it may hold as much as 90 percent THC. That said, consumers should be wary about consuming or inhaling too much.

Weed wax has recently been recognized for its medicinal benefits with a variety of different diseases and conditions. Both THC and CBD have made new headlines as being super effective in curbing specific symptoms such as seizures and anxiety. CBD (cannabidiol) and THC (tetrahydrocannabinol) are two natural compounds found in the marijuana plant. CBD may also be found in the hemp plant.

The major differences between the two are CBD does not have the psychoactive effects while THC does. CBD and THC react to the body in a very similar way at the chemical level, but only THC produces the “high” affect many seek. So, think of CBD as doing everything THC does without the psychoactive components.

Both substances are used in the medical field but CBD is more popular because of the lack of psychoactive components. CBD is capable of treating conditions such as inflammation, pain, migraines, nausea, and even depression.

Weed Wax Extraction Methods

There are a few different ways of extracting cannabis wax, but none of them are easy. This is a complex method that requires the best equipment possible in order for it to be effective. Fortunately, Cedarstone Industry manufactures the equipment for every step of the process. Clients can look into the process below.


This process starts by placing the marijuana plant matter or biomass into the extraction vessel. A solvent is also placed inside the container in order to remove soluble components. It is then filtered and separated.

Centrifuge Extractor

Firstly, place the biomass into the rotor and then fill it with chilled ethanol. Secondly, the rotor barrel then needs to be agitated with the plant material inside. Finally, high speeds will then get the extracted compound with ethanol.

Weed Wax Machine

Centrifuge Extractor


This process occurs in beakers in a freezer. However, the same can be accomplished in a filter reactor. It is important to note that this step may be skipped if the initial extraction was performed with a pre-chilled solvent. The temperature must low such as  -50 degrees C or -58 degrees Fahrenheit. Most importantly, this process separates the lipids from the solution.

Solvent Recovery

During this step, the goal is to separate the cannabinoids from the solvent. This process is done through vacuum-assisted evaporation. Normally, the evaporation is done in a Rotary Evaporator (RotoVap), Falling Film Evaporator (FFE), or Rising Film Evaporator (RFE).


This step enriches the THC or CBD content. If there are portions of the plant matter that are not psychoactive, then they can be transferred using heat.


This process separates cannabinoids from impurities via vacuum evaporation. Liquid or component is then isolated through selective heating, vaporization, and condensation. Overall, distillation is performed under reduced pressure.

Crystallization Reactor

Weed Wax Machine

Crystallization Reactor

If you are looking for very pure CPD, then this process will achieve just that. Clients need to dissolve the clear CPD oil that was already winterized and distilled. The distilled step needs to be near the boiling point and then cooled slowly.


Finally, this method isolates and purifies the cannabinoids. This process separates THC from CBD.

Secure Your Weed Wax Machine Today

Clients can now understand the complexities of extracting oils from cannabis.. This step is common among the industry and will certainly vary. Cedarstone Industry recognizes how complex this process is, which is why it needs the highest-quality and most trusted equipment available. With that said, clients are able to supply their customers with high-quality weed wax and other marijuana products.

Above all, Cedarstone Industry wants to satisfy the customer to the highest degree. We work with all kinds of businesses and each of them are as happy as the last. A few clients of ours include Blue Bell Creameries, Shiner, Heineken, Coca-Cola, and so many more. Our partnerships with our clients make us the perfect choice when it comes to these machines.

If you are needing trustable equipment for your cannabis products, then contact Cedarstone today. Clients can reach our team by calling (281) 397-3700. We also have a form on our contact us page for those who would rather reach out online. Regardless, we will provide the client with a high-quality weed wax machine.

Our Reviews

5.0 26 reviews

  • Avatar LightKemist ★★★★★ 2 weeks ago
    I've ordered stainless cuts from different companies but these are by far some of the most smoothest and precise cuts I've ever gotten for a great price … read more too and it was from from this company. Im building a custom exhaust and so far their product is worth every penny. Thanks Cedarstone really I mean that 100%
  • Avatar Mike Hodgson ★★★★★ a month ago
    Very fast service and delivery. Great products. Will buy from them again! 🤘
  • Avatar According to Hoyle ★★★★★ 2 months ago
    Use cedarstone for sanitary weld elbows for high quality custom exhuast systems they are fantastic pieces and well priced. Haven't had any issues yet. Quick … read more processing and shipping